yflyer.org

The American Y-Flyer Yacht Racing Association

Suggestions or problems with the web site?  E-mail the webmaster

Discover the Y

Build a Wood Y Rigging Ideas For Sale -- Boats & More Clubs, Regattas & Weather Photos Materials for Y Owners & Fleets

Introduction ] [ New Boats & Equipment ] Used Boats ] Used Sails, Spars & Covers ] Wanted to Buy ] Gifts ]

New Boats, Sails and Covers

Boats, Sails, Covers, Trailers, Hardware and Clothing -- Turner Marine

Y-Flyers built in fiberglass with your custom graphics and other items. Also North sails, Sailor’s Tailor covers, trailers, masts & booms, hardware, and clothing — in short, everything you need for your Y-Flyer. For more information, e-mail Turner Marine or call Chet Turner at 217-895-3395. Address: Turner Marine, R.R. 1, Box 214, Neoga, IL 62447.

Y for coloring.jpg (420758 bytes)Interested having Chet build you a boat with custom graphics??  Download a line drawing of the Y that's suitable for planning your design.  It's in Adobe .pdf format, so you'll need Adobe Acrobat Reader in order to view and print the file.  If you don't already have a copy of it, download Acrobat Reader free here.  Then, when you download the drawing, it will open automatically and you can save it to your hard drive and print copies.  If you have problems with Acrobat Reader, you can also click on the small graphic to enlarge it and print that -- but the quality is not nearly as good as the .pdf file!  If you're looking for ideas for your boat design, check out the Boat Art, More Boat Art and Still More Boat Art pages.

Covers

Trailering, mooring and bottom covers in stock for Y-Flyers. Visit Sailor’s Tailor web page.

The Sailors' Tailor Inc. ®   

TOLL FREE Tel. 800-800-6050

Sails

North Sails — Turner Marine sells North Sails and the cost is the same as ordering from North.  E-mail Chet or call him at 217-895-3395

Rowland Sails — send e-mail to inquire or call Bob Rowland at 937-862-7781.

Wood Boat

Completed hull and deck using modified stitch and glue construction with West system epoxy and okume plywood. Includes all parts, spars, stainless board, and McLaughlin rudder. The hull and deck have been assembled and the floorboards have been built. It is at that stage where the fairing, sanding, painting and rigging need to be done. Everything has been purchased for the completion of the project including over $1000 of Ronstan and Harken parts. For more details, contact Tom Schroder at 706-860-3512 or e-mail schro315@aol.com

Parts, Line, Clothing, Repairs, Trophies, and More

See the Helpful Links page